Whirlpool 4396841P PUR Push Button Side-by-Side Refrigerator Water Filter, 2-Pack

!#8#Whirlpool 4396841P PUR Push Button Side-by-Side Refrigerator Water Filter, 2-Pack

Brand : Whirlpool
Rate :
Price : $57.23
Post Date : Feb 18, 2012 23:17:21
Usually ships in 24 hours

Make sure the water and ice from your refrigerator is as clean and fresh tasting as possible by replacing its water filter. This Whirlpool PuR water filter is used in Whirlpool, KitchenAid, Maytag, Amana, and JennAir side-by-side refrigerators with filter access in the base grille.

It's NSF-certified to reduce cysts, particulates (class I), lead, mercury, and more. (The contaminants or other substances removed or reduced by this water filter are not necessarily in all users' water.) While it effectively removes contaminants from your water and ice, this filter also lowers the taste and odor of chlorine while retaining beneficial fluoride.

For the highest quality water and ice, your refrigerator's water filter needs to be changed over a period of time as its effectiveness at cleaning the water is reduced. For optimal results, you should replace this refrigerator water filter every 6 months to ensure clean, safe drinking water and ice.

Your refrigerator will even remind you when to change its filter, turning on an indicator light found near the water dispenser. Changing the filter is easy--just locate the old filter, twist and turn it until it becomes loose, then pull the old filter out and replace with the new filter.

This model (4396841) can be used to replace the following models of water filter:

• 4396842
• 8212650

Replacing Your Water Filter

For side-by-side refrigerators with filter access in the base grille, follow these instructions for replacing your filter:

1. Push the eject button, then pull the filter cap. Do not twist cap.
2. Remove the filter cap by turning it counter clockwise. Set aside cap. Discard old filter.
3. Remove the packaging and O-ring covers from the new filter.
4. Align arrows on the cap and new filter. Turn clockwise to snap in place.
5. Push filter into the base grill until the eject button pops. Gently tug on cap to ensure it is snug.
6. Flush the water system until a total of 3 gallons (12 L) has been dispensed.

Saving Lg Lcd Apple Mini Laptop For Sale Discounted Electric Guitar

Electrical Troubleshooting for Stairmaster

!±8± Electrical Troubleshooting for Stairmaster

Stairmaster 4600, 4400, & 4000PT stairclimbers, among the most popular exercise machines sold on the market today, have three electrical components that are responsible for most troubleshooting calls. The Alternator, Diode, and the resistor are the heart and soul of the Stairmaster 4600/4400PT stairclimber and often cause resistance levels to drop creating performance problems.

Tools Needed:

7/16", 3/8", & 1/4" nut drivers. 4" piece of wire with alligator clips attached to each end, and a multi-meter,

Symptom:

The Stairmaster loses all resistance when you step onto the pedals.

Alternator Test:

First, remove the machine from its power source. Then remove the side panels so you have a clear view of the alternator. On the back of the alternator, remove the black wire from the terminal B+ (marked POS). Remove the brown wire from the field terminal. You will need a length of wire 4" long with alligator clips attached to each end of the wire. Attach the wire to the B+ (POS) terminal and the field terminal, step on the machine for 10-15 seconds; if full resistance is present, the alternator has correct current flow. If no resistance is present, the next item to check is the alternator brushes. The brown square plate with two machine screws is the cover to the brushes. Remove the two machine screws with a ¼" nut driver and remove the alternator brushes. There should be ¼" or more of brush, any less and the alternator brushes should be replaced first. If the proper amount of brush is available, replace the alternator.

Diode Test:

Remove the brown wire and diode from the field terminal of the alternator and set the multi-meter to the Ohms setting. Place one lead on each end of the diode, and then reverse the leads. A good diode will indicate a high reading in one direction and a lower reading in the opposite direction. Replace the diode if both readings are high or if both readings are low.

Resistor Test:

Remove one wire from the load resistor and place one lead from the multi-meter, one each threaded post on the resistor. If the multi-meter does not read 0.5 Ohms, replace the resistor. As with any maintenance procedures always consult your owners' manual or seek the advice of a qualified repair technician.

Electrical Troubleshooting for Stairmaster

Casio Digital Piano Privia Clearance Sale Diesel Watch Mens Review